Shower Tile Before

Behind the Shower Tile was Rotting. This homeowner notice that a couple tiles were loose in the shower. After the water and moisture went behind the tile it all needed to be replaced.

Shower Tile Before

We then replaced the old with the new cement board. This is done prior to the new installation of tile.

Shower Tile After

The End Results! The shower is ready to be used again after behind the tile was replaced and the tile and grout were installed.

Tile Floor Before

Older Cracked Ceramic Tile Floor. This tile floor was not laid properly which caused cracking throughout the floor.

Tile Floor Before

We took out the old tile and put down new cement board.

Tile Floor After

The homeowner wanted to floor laid straight without the inserts put back in. Their floor is new again!

Backsplash Before

Here we took out the old backsplash to put in a Stone Backsplash.

Backsplash Before

Here is where the stone tile was installed... Slate Stone Backsplash.

Backsplash After

The Slate Stone backsplash is installed, grouted, and cleaned.